SW web management configuration

Latest reply: Dec 9, 2012 21:42:00 4279 1 0 0
SW web management configuration
  • x
  • convention:

user_1869547 Created Dec 9, 2012 21:42:00 Helpful(0) Helpful(0)

1. The web document through the FTP or TFTP upload to the cabinet SW cfcard directory or box SW flash directory.
2. Executive command HTTP server load file - name, loading Web page file.
3. Create network management account [Quidway]http server enable //enable http server

[Quidway-aaa]local-user admin password cipher admin //create a user and configure password [Quidway-aaa]local-user admin service-type http //configure the user service-type is http
4. Open Web browser on the PC, input SW management IP address in the address bar (need reachable route between PC and SW), after press enter key will display login dialog box. As shown in figure, input the Web network management account and password set before, input verification code, and choose the language of the Web network management system.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top