SNMP MIB's

Created Oct 27, 2018 07:13:25Latest reply Oct 27, 2018 14:26:16 221 2 1 0

Common MIB's for SNMP

 

Monitoring the device status

Object

OID

Description

MIB

hwEntityCpuUsage

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5

This object indicates the entity CPU usage. The value is in the range of 2 to 100.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityMemUsage

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7

This object indicates the entity memory usage. The value is in the range of 0 to 100.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityMemSize

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9

This object indicates the entity memory size, in bytes.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityTemperature

1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11

This object indicates the highest entity temperature displayed in the sensor, in °C.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityOpticalTemperature

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5

This object indicates the optical module temperature, in °C.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityOpticalVoltage

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6

This object indicates the optical module voltage, in mV.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityOpticalBiasCurrent

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7

This object indicates the optical module bias current, in uA.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityOpticalRxPower

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8

This object indicates the input power of the optical module (unit: dBm).

The power displayed by this object is 100 times the actual power. For example, if the value is 100, the actual power is 1dBm.

HUAWEI-ENTITY-EXTENT-MIB

hwEntityOpticalTxPower

1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9

This object indicates the transmit power of the optical module (unit: dBm).

The power displayed by this object is 100 times the actual power. For example, if the value is 100, the actual power is 1dBm.

HUAWEI-ENTITY-EXTENT-MIB

Interface traffic control

Object

OID

Description

MIB

ifTable

1.3.6.1.2.1.2.2.1

This object indicates the statistics on packets received and sent on the interface.

IF-MIB

ifOperStatus

1.3.6.1.2.1.2.2.1.8

This object indicates the interface status.

IF-MIB

hwIfMonitorInputRate

1.3.6.1.4.1.2011.5.25.41.1.7.1.1.8

This object indicates the inbound bandwidth usage.

HUAWEI-IF-EXT-MIB

hwIfMonitorOutputRate

1.3.6.1.4.1.2011.5.25.41.1.7.1.1.10

This object indicates the outbound bandwidth usage.

HUAWEI-IF-EXT-MIB

MAC and ARP monitoring

Object

OID

Description

MIB

dot1dTpFdbAddress

1.3.6.1.2.1.17.4.3.1.1

This object is used to obtain all MAC address entries.

BRIDGE-MIB

hwDynFdbMac

1.3.6.1.4.1.2011.5.25.42.2.1.3.1.1

This object is used to manage dynamic MAC address entries on the device.

HUAWEI-L2MAM-MIB

hwCfgFdbMac

1.3.6.1.4.1.2011.5.25.42.2.1.2.1.1

This object is used to configure a VLAN-based, VSI-based, or global blackhole-based MAC address table.

HUAWEI-L2MAM-MIB

hwArpDynTable

1.3.6.1.4.1.2011.5.25.123.1.17.1

This object is used to obtain dynamic ARP entries.

HUAWEI-ETHARP-MIB

hwArpCfgTable

1.3.6.1.4.1.2011.5.25.123.1.18.1

This object is used to configure and query static ARP entries.

HUAWEI-ETHARP-MIB

Service monitoring

Object

OID

Description

MIB

lldpRemTable

1.0.8802.1.1.2.1.4.1.1

This object indicates LLDP neighbor information.

LLDP-MIB

NOTE:
To access this object, you must first run the snmp-agent mib-view included iso-view iso command. By default, the NMS can only access internet objects (OID: 1.3.6.1). However, the OID Of LLDP MIB is 1.0.8802.1.1.2, which is not an internet object.

dot1dStpPortState

1.3.6.1.2.1.17.2.15.1.3

This object indicates the STP status of the interface:
  • 1: disabled
  • 2: blocking
  • 3: listening
  • 4: learning
  • 5: forwarding
  • 6: broken

BRIDGE-MIB

hwRrppRingState

1.3.6.1.4.1.2011.5.25.113.2.2.1.4

The value of this object identifies the status of the ring.

Currently, the supported values are as follows:

  • 1: unknown

  • 4: complete

  • 5: failed

  • 6: linkup

  • 7: linkdown

  • 8: preforwarding

  • 9: linkupnotify

  • 10: linkdownnotify

  • 11: preforwardnotify

HUAWEI-RRPP-MIB

NOTE:

The S1720GFR series switches do not support RRPP.

vrrpOperState

1.3.6.1.2.1.68.1.3.1.3

This object indicates the virtual router status:

  • initialize(1): The device does not process VRRP packets.
  • backup(2): The device receives VRRP packets sent by the master and determines whether the master works properly.
  • master(3): The device periodically sends VRRP Advertisement packets and forwards IP packets with the destination MAC address as the virtual MAC address.
  • x
  • convention:

Hawasli     Created Oct 27, 2018 10:35:47 Helpful(0) Helpful(0)

Helpful
  • x
  • convention:

Jessica_Tian  Moderator   Created Oct 27, 2018 14:26:16 Helpful(0) Helpful(0)

helpful
  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top