NE80 one BGP protocol alarm meaning and solution

Latest reply: Mar 26, 2016 07:09:22 1233 1 0 0

On NE80, there are alarms in logs
#Jan 19
15:20:34 2005 NC_ZXJ_NE80_R1 BGP/1/Trap4:
         BGP FSM moves from a higher numbered state to a lower numbered state BgpPeerRemoteAddr =
         BgpPeerState = 2

  • x
  • convention:

Osaideo Created Mar 26, 2016 07:09:22 Helpful(0) Helpful(0)

Handling Process

This is NE80 BGP neighbor alarm information, which is trap sent to NMS
The possible reasons are:

If we only configure BGP neighbor locally, while the peer couldn`t be contact; or the normal BGP neighbor interrupts.BGP will try to re-establish its neighbor, if fails, the alarms will be printed out.


1.remove the unwanted BGP neighbor.
2.if it is normal BGP neighbor, check the reason of BGP neighbor interruption.

BgpPeerState meaning
1 =idle
2 =connect
3 =active
4 =opensent
5 =openconfirm
6 =established

  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Fast reply Scroll to top