MA5200G Fails to Telnet in Local Authentication Because the Local Account is not

Created: Apr 6, 2016 05:44:27Latest reply: Apr 6, 2016 13:57:40 1376 1 0 0
Version: VRP3.30-2215 and the later ones. 
Symptoms: MA5200G fails to log into the equipment through the telnet account for local authentication, prompting failure of login continuously. 
Login authentication
Username:telnet
Password:
% Login failed!
  • x
  • convention:

Ravger  Visitor   Created Apr 6, 2016 13:57:40 Helpful(0) Helpful(0)

Handling Process
1.Check the configuration of user interface, and no problem is found: 
 user-interface vty 0 4                       
 acl 2000 inbound                                                                 
 authentication-mode aaa                                                          
 user privilege level 3            
2. The default_admin of system uses local authentication; according to checkup for configuration of local account, no error is found: 
local-aaa-server                                                                  
 user 123@default_admin password simple vlan authentication-type T                            
 user telnet password simple vlan authentication-type T   
3. Check the state of local account: 
[MA5200G]display user name telnet                                               
The contents of local user telnet:                                               
 Password          : vlan                                                         
 State             : Active                                                      
 Auth-Type-Mask    : T                                                            
 Admin-level       : -                                                           
 Idle-Cut          : No                                                           
 FTP-directory     : -                                                            
 Callback-check    : Yes                                                          
 Callback-number   : -                                                            
 CAR-Level         : -          
It is found that admin-level herein is empty(-),  but when the local user attempts to log in through telnet account, the user must be configured with level (the versions before set the level to 0 by default). 
4. The account could log in after changing the level of the local account to 3. For VRP3.30-2215, the local account is defaulted to no user level, which differs to the former versions, so it needs to set privately for access to equipment. 
Root Cause
The local account has no login level, so in the versions after VRP3.30-2215, the local account without configuration of level will fail in authentication, and cannot log into the equipment. 
Suggestions
If the local account serves as telnet account for login, it must be configured with admin-level; if Auth-type-mask is configured, it must have a T, so the user could log in through telnet. 
If the local account serves as FTP account for access, it must be configured with FTP-directory. If Auth-type-mask is configured, it must have an F, so the user could log in through FTP. 

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top