Interworking Solution

Created: Feb 28, 2019 15:01:54 19 0 0 0

Overview

The interworking mode used by a Huawei S series switch to connect to a server with multiple network adapters depends on the binding mode of network adapters. For details, see Interworking Analysis. The following solution uses the Windows server where network adapters are bundled in SLA mode as an example.

Networking Requirements

In Figure 2-68, the Windows server uses static link aggregation to bind multiple network adapters. A Huawei S series switch connects to the server using link aggregation in manual mode to increase link bandwidth and implement redundancy, ensuring data transmission and link reliability.

Figure 2-68  Networking for connecting a Huawei S series switch to a server using link aggregation 
imgDownload?uuid=92ddca24b72b4858bf5bf1d

Configuration Roadmap

The configuration roadmap is as follows:
  1. Create an Eth-Trunk on the Huawei S series switch and add member interfaces to the Eth-Trunk to implement link aggregation in manual mode.

  2. Implement static link aggregation on the Windows server to bind multiple network adapters.

Procedure

  1. Configure link aggregation in manual mode on the Huawei S series switch.

    <HUAWEI> system-view[HUAWEI] sysname Switch[Switch] interface eth-trunk 1[Switch-Eth-Trunk1] trunkport gigabitethernet 0/0/1 to 0/0/2[Switch-Eth-Trunk1] quit
  2. Configure static link aggregation on the Windows server to bind multiple network adapters. For details, see corresponding software description.

  3. Verify the configuration.

    Run the display eth-trunk [ trunk-id [ interface interface-type interface-number | verbose ] ] command to check the link aggregation configuration on the Huawei S series switch.

See more please click 

https://support.huawei.com/enterprise/en/doc/EDOC1000069520/9aadccc0/comprehensive-configuration-examples


  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top