Installing a Power Module

Created: Apr 11, 2014 17:28:38Latest reply: Apr 11, 2014 17:28:48 1192 1 0 0

Only the AR2240 and AR3260 can use a pluggable power module. By default, a pluggable power module has been installed in the power slot of the AR2240 or AR3260, and you do not need to install the power module

 

  • AC and DC power modules cannot be used together in the same router.
  • Procedure

    1. Wear an ESD wrist strap. Ensure that the ESD wrist strap is grounded and in a close contact with your wrist.
    2. Loosen the captive screw on the filler panel to remove the filler panel.
    3. Rotate the ejector levers on the 350 W AC power module outward and slide the power module into the slot horizontally along the guide rails until the power module is completely attached to the chassis. See Figure 1.

      Figure 1 Inserting a 350 W AC power module


    4. Rotate the ejector levers inward to lock the power module in the slot and then tighten the captive screws on both sides See Figure 2.

      Figure 2 Securing the 350 W AC power module

     

    • x
    • convention:

    Sophoni     Created Apr 11, 2014 17:28:48 Helpful(0) Helpful(0)

    Forward
    • x
    • convention:

    Reply

    Reply
    You need to log in to reply to the post Login | Register

    Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
    • Politically sensitive content
    • Content concerning pornography, gambling, and drug abuse
    • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
    Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
    If the attachment button is not available, update the Adobe Flash Player to the latest version!
    Fast reply Scroll to top