Huawei S5328C Switch priority qos question

Created Mar 03, 2016 17:49:34Latest reply Mar 04, 2016 16:41:04 1913 3 0 0

Hello,

Im using Huawei S5328C switch with priority qos (i assume). But i want to clarify myself: do adding the trust command in ingress port autimatically makes the switch working in priority QOS mode ?

so now: in egress port entering the command: display qos port statistics interface ge0/0/24. im seeing some queues filled with numbers and some of them are with dropped counters.

my final question is do this "simple qos" have any default "max" values for queues, which can cause increasing drops ? if yes, how to seee the defined rates ? If no - why drops are increasing ? could it be just beecause of high utilization/bursts ?

Thanks!!

  • x
  • convention:

user_2790689  Expert   Created Mar 03, 2016 22:21:13 Helpful(0) Helpful(0)

waiting for expert to solve this problem.
  • x
  • convention:

who_knows  Mentor   Created Mar 04, 2016 11:20:05 Helpful(0) Helpful(0)

1. The trust command in ingress port will clarify different priority traffic according to 8021p or dscp, it will take effect when traffic transmit from egress port.

2. High utilization/bursts(exceed the line-rate of interface) will cause traffic drop, "display qos queue length interface " can show the max length of every queue of interface.

  • x
  • convention:

kajatonas     Created Mar 04, 2016 16:41:04 Helpful(0) Helpful(0)

the input traffic on 10Gbit interface is very low ~500mbits so it outputs on Ethtrunk which is 2x1Gb. And the lots of discards on both 1gb ports occurs. So why it happens if the traffic utilization is low. As i know this type of switch have common switchfabric for all interfaces (even 10gbit). So it shouldnt be because of 10gb port which could (would) process traffic faster than gbit ports could output ?


here is some diagnostic information:


<Huawei_Switch>display qos port statistics interface GigabitEthernet 0/0/24
Port: GigabitEthernet0/0/24
-----------------------------------------------------------------------------
Queue                     Passed(Packet)                  Dropped(Packet)
-----------------------------------------------------------------------------
0                         272398                          0
-----------------------------------------------------------------------------
1                         2711934044                      971348
-----------------------------------------------------------------------------
2                         2335990                         0
-----------------------------------------------------------------------------
3                         683479622                       0
-----------------------------------------------------------------------------
4                         129725078                       0
-----------------------------------------------------------------------------
5                         2609697872                      3366
-----------------------------------------------------------------------------
6                         116700                          0
-----------------------------------------------------------------------------
7                         13706                           0
-----------------------------------------------------------------------------


InUti/OutUti: input utility/output utility
Interface                   PHY   Protocol InUti OutUti   inErrors  outErrors
Eth-Trunk1                  up    up         11%    31%          0          0
  GigabitEthernet0/0/23     up    up         10%    34%          0          0
  GigabitEthernet0/0/24     up    up         12%    29%          0          0

XGigabitEthernet0/1/2       up    up       6.25%  2.25%          0          0

<Huawei_Switch>display  interface GigabitEthernet 0/0/23 | include Discard
Discard        :                   0, Total Error        :                   0
Discard        :            23782489, Total Error        :                   0

<Huawei_Switch>display interface GigabitEthernet 0/0/24 | include Discard
Discard        :                   0, Total Error        :                   0
Discard        :            25536802, Total Error        :                   0


S5328C-EI-24S

  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top