How to Recognize the GE Interface and 10GE Interface

Latest reply: Mar 27, 2016 17:50:55 904 1 0 0

How to Recognize the GE Interface and 10GE Interface?

  • x
  • convention:

Osaideo Created Mar 27, 2016 17:50:55 Helpful(0) Helpful(0)

Alarm Information
Handling Process

The equipment does not show the interface GE or 10GE in configuration. The command "display interface GigabitEthernet1/0/0" can be used for the real bandwidth. And the result can be seen from the output. For example, the result is "BW: 10G", which means the interface is 10GE port. And if the result is "BW: 1G", which means the interface is GE port.
             Root Cause


  • x
  • convention:


You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Fast reply Scroll to top