How to Configure a Layer 2 Interface as a Layer 3 Interface on a Switch?

Latest reply: Mar 14, 2016 15:31:39 936 1 0 0
How to Configure a Layer 2 Interface as a Layer 3 Interface on a Switch?
  • x
  • convention:

NelsonBon Created Mar 14, 2016 15:31:39 Helpful(0) Helpful(0)

By default, Ethernet interfaces on switches work as Layer 2 interfaces.Run the undo portswitch command to configure the Ethernet interfaces as Layer 3 interfaces.

For switches in V200R003C00 and earlier versions:


Only Layer 2 Ethernet interfaces on the S5300HI and S5310EI can be configured as Layer 3 interfaces.
After an Ethernet interface is configured as a Layer 3 interface, the interface cannot be configured with an IP address.


For switches in V200R005C00 and later versions:


Only Layer 2 Ethernet interfaces on the S5300HI, S5310EI, S5300EI, S5320EI, S6300EI and S6320EI can be configured as Layer 3 interfaces.
After an Ethernet interface is configured as a Layer 3 interface, the interface can be configured with an IP address.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top