How Do I Use the Web System to Log In to the Switch?

Created: May 25, 2017 08:50:46Latest reply: May 25, 2017 14:14:30 965 1 0 0
How Do I Use the Web System to Log In to the Switch?
  • x
  • convention:

ms.america  Visitor   Created May 25, 2017 14:14:30 Helpful(0) Helpful(0)

Before logging in to the switch through the web system, complete the following configurations:
  1. Upload the web page file to the device through FTP or TFTP.
  2. Run the http server load file-name command to load the web page file.
  3. Enable the HTTP function and create a web user account.
    [Quidway] http secure-server enable
    [Quidway] http server enable
    [Quidway] local-user admin password cipher admin
    [Quidway] local-user admin service-type http
    
  4. Open the web browser on your PC, enter the management IP address of the switch, and press Enter to display the Login page. (Ensure that the PC and switch have a reachable route to each other.) Enter the web user name, password, and verification code, and select a language for the web system, as shown in Figure 1.
    Figure 1 Login page
    fig_dc_cfg_login_000701.png
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top