How Do I Obtain the Serial Number of a Modular Switch

Created: Mar 31, 2016 02:07:28Latest reply: Mar 31, 2016 10:08:26 928 1 0 0
How Do I Obtain the Serial Number of a Modular Switch?
  • x
  • convention:

yolanda_turner  Visitor   Created Mar 31, 2016 10:08:26 Helpful(0) Helpful(0)

Obtaining the Chassis Serial Number
In a standalone switch:
Log in to the switch through Telnet or the console interface, and then run the display elabel backplane command in the user view to display the electronic label information. The BarCode field in the command output shows the chassis serial number.

<Quidway> display elabel backplane
Info: It is executing, please wait...
[BackPlane_1]
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0
[Board Properties]
BoardType=EH02BAKK
BarCode=2102113089P0BB000881
Item=02113089
……………
In a cluster:
Log in to the master switch through Telnet or the console interface, and then run the display elabel backplane chassis chassis-id command (chassis-id specifies the CSS ID of a member chassis) in the user view to display the electronic label information. The BarCode field in the command output shows the serial number of the specified chassis.

<Quidway> display elabel backplane chassis ?
  INTEGER<1-2>  Chassis ID                                                   

<Quidway> display elabel backplane chassis 2
Info: It is executing, please wait...                                         
                                                                              
[BackPlane_2]                                                                
/$[ArchivesInfo Version]
/$ArchivesInfoVersion=3.0

[Board Properties]                                                            
BoardType=EH02BAKK
BarCode=2102113089P0BB000881                                                     
Item=02113549                                                                 
……………

   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the chassis ID according to the help information.

Obtaining the Serial Number of a Card
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a card. The BarCode field in the command output shows the serial number of the card.

<Quidway> display elabel ?
  <1-1>      The present chassis                                              
  backplane  Backplane                                                        
  brief      Display information briefly                                      
<Quidway> display elabel 1/?
  <4,6-8>                              <CMU1>
  <FAN1-FAN2>                          <PWR1-PWR2>
<Quidway> display elabel 1/6 brief
Info: It is executing、please wait...                                         
                                                                              
[Slot_6]                                                                     
/$[Board Integration Version]                                                 
/$BoardIntegrationVersion=3.0                                                 
                                                                              
[Main_Board]                                                                  
/$[ArchivesInfo Version]                                                      
/$ArchivesInfoVersion=3.0                                                     
                                                                              
[Board Properties]                                                            
BoardType=ET1D2S08SX1E
BarCode=020LVF6TBB000043                                               
Item=03020LVF                                                                  
……………

    NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the slot ID according to the help information.

Obtaining the Serial Number of a Power Module
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a power module. The SN field in the command output shows the serial number of the power module.

<Quidway> display elabel ?
  <1-1>      The present chassis                                              
  backplane  Backplane                                                        
  brief      Display information briefly                                      
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/PWR1
Info: It is executing, please wait...                                         
                                                                              
[Slot_21]                                                                     
/$[Board Integration Version]                                                 
/$BoardIntegrationVersion=3.0                                                 
                                                                              
[Main_Board]                                                                  
DATE=13_02_08                                                                 
SN=A664A0212080086V0.9A

   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the power module ID according to the help information.

Obtaining the Serial Number of a Fan Module
Log in to the master switch through Telnet or the console interface, and then run the display elabel command in the user view and specify a slot ID according to help information to display the electronic label of a fan module. The BarCode field in the command output shows the serial number of the fan module.

<Quidway> display elabel ?
  <1-1>      The present chassis                                              
  backplane  Backplane                                                        
  brief      Display information briefly                                      
<Quidway> display elabel 1/?
  <5,8,13,16>                             <CMU1>
  <FAN1-FAN5>                             <PWR1-PWR4>
<Quidway> display elabel 1/FAN2
Info: It is executing, please wait...                                         
                                                                              
[Slot_18]                                                                     
/$[Board Integration Version]                                                 
/$BoardIntegrationVersion=3.0                                                 
                                                                              
[Main_Board]                                                                  
/$[ArchivesInfo Version]                                                      
/$ArchivesInfoVersion=3.0                                                     
                                                                              
[Board Properties]                                                            
BoardType=LE02FCMC                                                            
BarCode=2103010JTF0123456789                                           
Item=02120995                                                                 
……………

   NOTE:
The command syntax may differ in different software versions. You can enter a question mark (?) to obtain help information about the command and set the fan module ID according to the help information.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top