How Do I Configure Port Isolation

Created: Mar 22, 2016 23:37:34Latest reply: Mar 23, 2016 05:49:32 1093 1 0 0
How Do I Configure Port Isolation?
  • x
  • convention:

NelsonBon  Visitor   Created Mar 23, 2016 05:49:32 Helpful(0) Helpful(0)

The port isolation feature isolates interfaces in a VLAN. To configure port isolation, run the port-isolate enable [ group group-id ] command in the interface view. For example, configure port isolation on GigabitEthernet1/0/1:

[Quidway] interface gigabitethernet1/0/1
[Quidway-GigabitEthernet1/0/1] port-isolate enable

To configure unidirectional port isolation, run the am isolate { interface-type interface-number }&<1-8> or am isolate interface-type interface-number1 [ to interface-number2 ] command in the interface view. For example, configure unidirectional isolation on GigabitEthernet1/0/1 and GigabitEthernet1/0/2:

[Quidway] interface gigabitethernet 1/0/1
[Quidway-GigabitEthernet1/0/1] am isolate gigabitethernet 1/0/2


  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top