FAQ-Can Two Power Supply Units of an AR3260 Work in Active/Standby Mode?

Created: Aug 26, 2015 10:14:53Latest reply: Aug 26, 2015 14:16:26 1117 1 0 0

An AR3260is equipped with two 350 W power supply units. The two power supply units work in load balancing mode and provide power to the system simultaneously.

  • When both two power supply units can work normally, they must work at the same time. That is, they do not support the active/standby mode (one unit is working, and the other is in sleeping state).
  • When the load power of the system is lower than 350 W, the two power supply units can work in 1+1 backup mode. When one power supply unit fails, the other one can power the router without affecting services on the router.
  • When the load power of the system is higher than 350 W, the two power supply units cannot work in 1+1 backup mode.

  • x
  • convention:

user_2790689     Created Aug 26, 2015 14:16:26 Helpful(0) Helpful(0)

Thank you.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top