Due to the Unmonitored Tunnel Interface, the VRRP Is Not Switched After a TSU bo

Created Mar 10, 2016 18:26:53Latest reply Mar 11, 2016 05:49:41 962 1 0 0
The TSU board is used to provide GRE services. To ensure network reliability, two NE40Es are adopted to form a VRRP application. The VRRP monitors the uplink physical port. When the active NE40E TSU board is faulty, the VRRP is not switched, resulting in service interruptions.
  • x
  • convention:

bellabella     Created Mar 11, 2016 05:49:41 Helpful(0) Helpful(0)

Handling Process

On a NE40E, a TSU board that transmits GRE services is connected to the network by using a tunnel interface. The GRE board is disconnected from the network if the tunnel interface goes Down, and the tunnel interface will be deleted if the TSU board fails. In this case, the configured tunnel interfaces are lost because of the TSU board failure. However, the uplink interface board still works normally. Since the VRRP monitors only the uplink physical port, the VRRP is not switched and the service is interrupted. Root Cause

The tunnel interface is not configured with the VRRP monitoring. The VRRP cannot detect the interface fault or perform switchovers. Solution

1. Add VRRP monitoring on the Tunnel interface status and ensure that the traffic can be switched to the standby plane when the TSUE board is faulty.
vrrp vrid xxx track interface Tunnelx/x/x      // To monitor the tunnel interface in the uplink and downlink VRRP backup group.
2. A VRRP backup group can track the status of a maximum of eight interfaces. It is recommended to configure the VRRP backup group to track only one tunnel interface on a single TSU board, because a GRE board failure will cause all tunnel interface configurations on this board to be deleted. Suggestions

On a network configured with logical interfaces, a VRRP backup group must be configured to track both the logical interface status and the physical interface status. In this manner, the situation that no VRRP swichover is triggered when the physical interface works properly but the logical interface fails is avoided.

  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top