Differences of models CE series switches (LI, EI and HI)?

Created: Jul 5, 2019 01:36:35Latest reply: Jul 5, 2019 09:13:26 59 3 0 0
  Rewarded Hi-coins: 0 (problem resolved)

What are the main differences between the CE series switch models (LI, EI and HI)?

  • x
  • convention:

Featured Answers
Admin Created Jul 5, 2019 09:13:26 Helpful(2) Helpful(2)

@Renan_Brasil Hi,
LI indicates the switch support the less features, LI model swich is commonly used as a access switch.
EI indicates the switch is a enhanced switch, this model support more advanced features than the LI does,
HI indicates the high performance, it supports the most features, and it can works as the core switch in the network.
In simple terms, LI, EI and HI stands for the features and performance that the switch support. The features supported and switch performance obbey the rules: LI < EI < HI.
  • x
  • convention:

All Answers
wissal MVE Created Jul 5, 2019 03:27:39 Helpful(0) Helpful(0)

Hi,
The main differences between the CE series switch models (LI, EI and HI)


  • CE8800, CE7800, CE6800, and CE5800 series switches of EI/HI/LI models have corresponding system software packages that are named based on the switch models.
    For example:
    • CE7850EI-V100R003C00SPC600.cc
    • CE6810EI-V100R003C00SPC600.cc
    • CE6850EI-V100R003C00SPC600.cc
    • CE5810EI-V100R003C00SPC600.cc
    • CE5850EI-V100R003C00SPC600.cc
    • CE5850HI-V100R003C00SPC600.cc
    Some models are further classified into the optical and electrical models. For example, for CE6870EI series switches, the system software package used by the CE6870-48T6CQ-EI is different from that used by other CE6870EI switches.
    • The system software package used by the CE6870-48T6CQ-EI is named as CE6870T-EI-V200R002C50SPC800.cc.
    • The system software package used by other CE6870EI switches is named as CE6870S-EI-V200R002C50SPC800.cc.
    Device models and versions used to set up SVF systems of fixed switches
    VersionParent Switch ModelLeaf Switch ModelRemarks

    V100R003C00

    V100R003C10

    CE6850-48S4Q-EI
    • CE5810-48T4S-EI
    • CE5810-24T4S-EI
    • CE6810-48S4Q-EI
    • In V100R005C00 and earlier versions, leaf switches in an SVF system must be the same series. For example, CE5810-48T4S-EI and CE5810-24T4S-EI can belong to the same SVF system, but CE6810-48S4Q-EI and CE5810-48T4S-EI cannot.

    • Versions of leaf switches must be the initial version that supports this model of switches as leaf switches or higher versions.

    • In V100R005C00, when a CE6810-48S4Q-EI functions as a leaf switch, its last 40GE interface cannot be split.
    V100R005C00CE6850-48S4Q-EI
    • CE5810-48T4S-EI
    • CE5810-24T4S-EI
    • CE6810-48S4Q-EI
    CE6810-48S4Q-EI
    • CE5810-48T4S-EI
    • CE5810-24T4S-EI
    CE7850-32Q-EI
    • CE6810-48S4Q-EI
    V100R005C10CE6850-48S4Q-EI
    • CE5810-48T4S-EI
    • CE5810-24T4S-EI
    • CE6810-48S4Q-EI
    • In V100R005C10 and later versions, leaf switches in an SVF system can be switches of different series and models. For example, CE6810-48S4Q-EI and CE5810-48T4S-EI can belong to the same SVF system.

    • Versions of leaf switches must be the initial version that supports this model of switches as leaf switches or higher versions.

    • In V100R005C10, when a CE6810-48S4Q-EI, CE6810-48S4Q-LI, or CE6810-32T16S4Q-LI functions as a leaf switch, its last 40GE interface cannot be split. This limitation does not apply to a CE7850-32Q-EI that functions as a parent switch.

      In V100R006C00 and later versions, by default, when a CE6810-48S4Q-EI, CE6810-48S4Q-LI, or CE6810-32T16S4Q-LI functions as a leaf switch, its last 40GE interface cannot be split. This limitation does not apply to a CE7850-32Q-EI that functions as a parent switch. If you need to split the last 40GE interface, run the device exclude leaf-type ce5810eicommand to prevent a CE5810EI from joining an SVF system as a leaf switch.

    • When a CE6810LI functions as a leaf switch to establish an SVF system with a parent switch using 40GE high-speed cables, both leaf and parent switches need to be upgraded to V100R005C10SPC200 or a later version.
    Thanks

  • x
  • convention:

yogijain MVE Created Jul 5, 2019 07:36:57 Helpful(0) Helpful(0)

143303fkg1xhh7v14v7ssa.png



143318i5aydhax5kx6tidx.png

143329a0vukvgwl0xus2z6.png

143342i11nhic3hhsoo18n.png


153259vpio3pzybycma4d3.png




Details  Description

153804pmm3dmm58fydm3lz.gif

HI , 

Please find the details description as desired 


Regards


  • x
  • convention:

Yogendra%20Jain
chenhui Admin Created Jul 5, 2019 09:13:26 Helpful(2) Helpful(2)

@Renan_Brasil Hi,
LI indicates the switch support the less features, LI model swich is commonly used as a access switch.
EI indicates the switch is a enhanced switch, this model support more advanced features than the LI does,
HI indicates the high performance, it supports the most features, and it can works as the core switch in the network.
In simple terms, LI, EI and HI stands for the features and performance that the switch support. The features supported and switch performance obbey the rules: LI < EI < HI.
  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top