Configure IKE ipsec between Router CISCO IOS Router and Huawei

Created: Sep 23, 2013 22:18:16Latest reply: Sep 30, 2018 18:57:57 3761 6 0 0
 

People FORUM:

I am needing to configure tunnels IPSEC Dynamic Map between a Huawei router against a CISCO router (IOS)
The ipsec tunnel starts from a Huawei Router with ADSL Internet access (IP via DHCP) and ends on a CISCO router (central site) with a fixed public address Internet

Best Regards
Alejandro

  • x
  • convention:

MauroLatam     Created Sep 29, 2013 04:02:32 Helpful(0) Helpful(0)

I tried setting up a VPN between Cisco and Huawei with eNSP and GNS3, but Cisco routers alerts about a Malformed IKE packets. I dont´know the solution.


Is there any cryopto dynamic maps in Huawei??


Thanks.

  • x
  • convention:

Monica     Created Sep 24, 2013 10:13:59 Helpful(0) Helpful(0)

hi, there is an IPsec commands compare between Huawei and Cisco,

as to your requirement, Huawei router configure the remote-address x.x.x.x ( central site ,a fixed public address Internet) as usually,  pay attention to the Cisco router  side, the remote-address is no-fixed (IP via DHCP)

 

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

aarganar     Created Sep 25, 2013 00:47:13 Helpful(0) Helpful(0)

Monica:

Thank you for responding to my post. In your example both router have Fixed IP addresses. In my case operates one end connected to an ADSL Internet access and the other with fixed IP address so the IPSEC necociacion should not consider the Source IP.

I consult you something more,  Your example is with 19XX router for my part I am testing with an AR 2809 and the commands are different You'll have some old example in this line?

Best Regards
  • x
  • convention:

ElevenTAN     Created Dec 5, 2014 13:11:22 Helpful(0) Helpful(0)

Reply 4 #

Hi May I know, did u solve your issue?

I have exactly the same setup like you. If you solve the issue. 

Do you mind to share me the configuration?

  • x
  • convention:

MauroLatam     Created Dec 5, 2014 23:21:01 Helpful(0) Helpful(0)

Hi, I never solved the issue.


It clearly a problem of eNSP generated packets.



  • x
  • convention:

faysalji  Visitor   Created Sep 30, 2018 18:57:57 Helpful(0) Helpful(0)

Problem solved?
  • x
  • convention:

If you think my post/reply is useful, please click the Helpful button and flag my post as a BEST ANSWER. Thanks

Reply

Reply
You need to log in to reply to the post Login | Register

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!

Login and enjoy all the member benefits

Login
Fast reply Scroll to top