Common Ethernet Interface Operations : Configuring the Interface Rate

Created May 19, 2016 09:18:13Latest reply May 19, 2016 09:20:11 1038 1 0 0

Manually Configuring the Interface Rate in Auto-Negotiation Mode

# Set the negotiation rate to 100 Mbit/s for Ethernet interface GE0/0/1 working in auto-negotiation mode.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] negotiation auto
[HUAWEI-GigabitEthernet0/0/1] auto speed 100
NOTE:

GE optical interfaces do not support manually configuring the interface rate in auto-negotiation mode, except the GE optical interface that has an GE copper module installed.

Configuring the Interface Rate in Non-Auto-Negotiation Mode

# Set the negotiation rate to 100 Mbit/s for Ethernet interface GE0/0/1 working in non-auto-negotiation mode.
<HUAWEI> system-view
[HUAWEI] interface gigabitethernet 0/0/1
[HUAWEI-GigabitEthernet0/0/1] undo negotiation auto
[HUAWEI-GigabitEthernet0/0/1] speed 100
 

  • x
  • convention:

user_1763575     Created May 19, 2016 09:20:11 Helpful(0) Helpful(0)

Good,Thank you!
  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top