Command Support

Created Nov 16, 2018 03:50:19Latest reply Nov 23, 2018 11:03:37 181 3 0 0

Command Support

Commands provided in this section and all the parameters in the commands are supported by all switch models by default, unless otherwise specified. For details, see specific commands.

cli enable-config

Function

The cli enable-config command enables command operation rights when the system is busy performing operations, such as configuration restoration and batch backup.

The undo cli enable-config command disables command operation rights when the system is busy performing operations, such as configuration restoration and batch backup.

By default, command operation rights are disabled.

Format

cli enable-config

undo cli enable-config

Parameters

None

Views

Diagnostic view

Default Level

3: Management level

Usage Guidelines

During configuration restoration, the undo cli enable-config command disables command operation rights to prevent command running from affecting configuration restoration. If configuration restoration fails, the system is in the locked state. You must run the cli enable-config command to enable command operation rights to locate the fault and restore system operating.

Example

# Enable command operation rights when the system is busy performing operations.

<HUAWEI> system-view
[HUAWEI] diagnose
[HUAWEI-diagnose] cli enable-config

  • x
  • convention:

Skay  Adept   Created Nov 17, 2018 17:03:03 Helpful(0) Helpful(0)

good function about this command .
During configuration restoration, the undo cli enable-config command disables command operation rights to prevent command running from affecting configuration restoration. If configuration restoration fails, the system is in the locked state. You must run the cli enable-config command to enable command operation rights to locate the fault and restore system operating.
  • x
  • convention:

Nazdak     Created Nov 21, 2018 02:48:29 Helpful(0) Helpful(0)

Exactly my friend, you are absolutely right
  • x
  • convention:

Mark.hu  Adept   Created Nov 23, 2018 11:03:37 Helpful(0) Helpful(0)

The cli enable-config command enables command operation rights when the system is busy performing operations, such as configuration restoration and batch backup.

The undo cli enable-config command disables command operation rights when the system is busy performing operations, such as configuration restoration and batch backup.

By default, command operation rights are disabled.
  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top