AR169F DSL Configuration

Created Mar 21, 2016 22:01:43Latest reply Mar 25, 2016 20:29:58 4159 4 0 0

Hi,

I am trying to use VDSL on AR169F. I have checked the DSL line with a Huawei HG Modem and it is working without any errors. You can find the version and current configuration below. I would appreciate any help. Thanks.

<Huawei>disp current-configuration
[V200R005C20SPC200]
#
drop illegal-mac alarm
#
dns resolve 
dns proxy enable
#
wlan ac-global carrier id other ac id 0
#
set workmode slot 0 VDSL atm
#
dhcp enable
#
pki realm default
enrollment self-signed
#
ssl policy default_policy type server
pki-realm default
#
acl name Atm0/0/0 2999 
rule 5 permit
#
aaa
authentication-scheme default
authorization-scheme default            
accounting-scheme default
domain default 
domain default_admin 
local-user admin password irreversible-cipher password
local-user admin privilege level 15
local-user admin service-type telnet http
#
firewall zone Local
priority 16
#
interface Dialer1
link-protocol ppp
ppp chap user user@telco
ppp chap password cipher password
ppp pap local-user user@telco password cipher password
ppp ipcp dns admit-any
ppp ipcp dns request
tcp adjust-mss 1460
ip address ppp-negotiate
dialer user arweb
dialer bundle 1
dialer-group 1
nat outbound 2999
#                                        
interface Vlanif1
ip address 10.254.1.7 255.255.255.0
#
interface GigabitEthernet0/0/0
#
interface Atm0/0/0
pvc 8/35
  map bridge Virtual-Ethernet0/0/0
#
interface Virtual-Ethernet0/0/0
pppoe-client dial-bundle-number 1
#
interface NULL0
#                                        
dialer-rule
dialer-rule 1 ip permit
#
http secure-server ssl-policy default_policy
http server enable
http secure-server enable
#
ip route-static 0.0.0.0 0.0.0.0 Dialer1
#
user-interface con 0
authentication-mode password
set authentication password cipher password
user-interface vty 0
authentication-mode aaa
user privilege level 15
user-interface vty 1 4
#
wlan ac
#
return


<Huawei>disp version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.160 (AR160 V200R005C20SPC200)
Copyright (C) 2011-2014 HUAWEI TECH CO., LTD
Huawei AR169F Router uptime is 0 week, 2 days, 23 hours, 13 minutes

MPU 0(Master) : uptime is 0 week, 2 days, 23 hours, 13 minutes
SDRAM Memory Size    : 512     M bytes
Flash Memory Size    : 512     M bytes
MPU version information :
1. PCB      Version  : ARSRU169FW VER.B
2. MAB      Version  : 0
3. Board    Type     : AR169F
4. CPLD0    Version  : 101
5. BootROM  Version  : 603
SubBoard[1]:
1. PCB      Version  : AR1VDSLABD VER.A
2. Board    Type     : VDSL-ABD
3. BootROM  Version  : 0

  • x
  • convention:

sertan_akyuz  Novice   Created Mar 25, 2016 20:29:58 Helpful(0) Helpful(0)

Hi,


I solved my problem with help from a Huawei support engineer. In PTM mode you need to add vlan information with subinterface.

  • x
  • convention:

user_2790689  Expert   Created Mar 22, 2016 08:55:21 Helpful(0) Helpful(0)

waiting for expert to help you.
  • x
  • convention:

im2good  Adept   Created Mar 22, 2016 10:55:20 Helpful(0) Helpful(0)

So what is the problem using this configuration?
  • x
  • convention:

sertan_akyuz  Novice   Created Mar 22, 2016 14:57:52 Helpful(0) Helpful(0)

Hi g00198393,


Thank you for the response. Router can't get an IP address with this configuration.


<Huawei>disp ip int br
*down: administratively down
^down: standby
(l): loopback
(s): spoofing
(E): E-Trunk down
The number of interface that is UP in Physical is 5
The number of interface that is DOWN in Physical is 2
The number of interface that is UP in Protocol is 4
The number of interface that is DOWN in Protocol is 3

Interface                         IP Address/Mask      Physical   Protocol 
Atm0/0/0                          unassigned           up         up       
Cellular0/0/0                     unassigned           down       down     
Dialer1                           unassigned           up         up(s)    
GigabitEthernet0/0/4              unassigned           down       down     
NULL0                             unassigned           up         up(s)    
Virtual-Ethernet0/0/0             unassigned           up         down     
Vlanif1                           10.254.1.7/24        up         up  

  • x
  • convention:

Responses

Reply
You need to log in to reply to the post Login | Register

Notice:To ensure the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but not limited to politically sensitive content, content concerning pornography, gambling, drug abuse and trafficking, content that may disclose or infringe upon others' intellectual properties, including commercial secrets, trade marks, copyrights, and patents, and personal privacy. Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see“ Privacy Policy.”
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Fast reply Scroll to top