950a
- x
- convention：
- Emotion(0)
|
Hello dear! There are many different configurations that will help you to achieve your requirements and I'll list one configuration option for you. You can configure the ISM6 single board and then enable the IS6 operation mode. XMC-3 ODU 11GHz is used for the ODU module. The relevant parameters are set as follows. That is, you can achieve the rate you want:
The settings for trying to achieve 1G rates will be different with XPIC and without XPIC. Hope this helps! |
|
|
Hello dear! There are many different configurations that will help you to achieve your requirements and I'll list one configuration option for you. You can configure the ISM6 single board and then enable the IS6 operation mode. XMC-3 ODU 11GHz is used for the ODU module. The relevant parameters are set as follows. That is, you can achieve the rate you want:
The settings for trying to achieve 1G rates will be different with XPIC and without XPIC. Hope this helps! |
|
BetterMing
Created Jul 2, 2021 00:57:39
(1)
(0)
We do not have permission to configure remotely. You can contact your local Huawei representative. They can perform remote configuration parameters for you. https://e.huawei.com/en/service-hotline-query |
|
|
|
Comment
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
