802.1x with ensp connected to an external device
Created: May 5, 2019 18:33:14Latest reply: May 6, 2019 11:33:42
1265
5
0
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
Posted by kdw at 2019-05-06 06:59Hi chenhui,thank you very much.I understand, but I want to authenticate a external Device with 802.1 ... I think it should work, but you need to adjust your connections.
|
|
@kdw hi!
Alternatively, you can refer to one of my previous posts, which will walk you through this: |
|
All Answers
|
@kdw hi!
Alternatively, you can refer to one of my previous posts, which will walk you through this: |
|
|
Hi chenhui,
thank you very much.  I understand, but I want to authenticate a external Device with 802.1x on ensp switch. So I am not sure if this is possible.
|
|
Posted by kdw at 2019-05-06 06:59Hi chenhui,thank you very much.I understand, but I want to authenticate a external Device with 802.1 ... I think it should work, but you need to adjust your connections.
|
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
