6050dn Software needed
Created: Jan 26, 2022 09:17:51Latest reply: Jan 26, 2022 10:11:27
165
6
0
0
0
Rewarded HiCoins：
0
(problem resolved)
- x
- convention：
- Emotion(0)
Featured Answers
user_3374397
Created Jan 26, 2022 13:41:23
(0)
(0)
Hi, I need fit version. The version number of the AC is V200R007C20SPC300 
jason_hu
Reply user_3374397 Created Jan 27, 2022 05:43:51
(0)
(0)
Because the AP does not have the V200R007 version, it is already EOS. There are currently two solutions 1. Upgrade the AC version and then upgrade the AP at the same time, but it must be ensured that the AP version is less than or equal to the AC version. This solution will require all APs to be upgraded. 2. Export the version you need from other APs, and then import this version into the AP.
user_3374397
Created Jan 27, 2022 07:54:06
(0)
(0)
Thank you very much for your solutions. Number 2 sounds good for me. Now i need to find out how can i export it. Can i do it via AC or do i need to login to AP with serial connection.
jason_hu
Reply user_3374397 Created Feb 11, 2022 01:15:25
(0)
(0)
Two lines need to be connected, one network line is used to transmit data, and one serial line is used to type commands. https://support.huawei.com/hedex/hdx.do?docid=EDOC1100064349&lang=en&id=dc_cfg_file_0023 |
All Answers
user_3374397
Created Jan 26, 2022 13:41:23
(0)
(0)
Hi, I need fit version. The version number of the AC is V200R007C20SPC300
jason_hu
Reply user_3374397 Created Jan 27, 2022 05:43:51
(0)
(0)
Because the AP does not have the V200R007 version, it is already EOS. There are currently two solutions 1. Upgrade the AC version and then upgrade the AP at the same time, but it must be ensured that the AP version is less than or equal to the AC version. This solution will require all APs to be upgraded. 2. Export the version you need from other APs, and then import this version into the AP.
user_3374397
Created Jan 27, 2022 07:54:06
(0)
(0)
Thank you very much for your solutions. Number 2 sounds good for me. Now i need to find out how can i export it. Can i do it via AC or do i need to login to AP with serial connection.
jason_hu
Reply user_3374397 Created Feb 11, 2022 01:15:25
(0)
(0)
Two lines need to be connected, one network line is used to transmit data, and one serial line is used to type commands. https://support.huawei.com/hedex/hdx.do?docid=EDOC1100064349&lang=en&id=dc_cfg_file_0023 |
Comment
Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
- Politically sensitive content
- Content concerning pornography, gambling, and drug abuse
- Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
