5700 mpls ldp session

Latest reply: Feb 6, 2013 11:45:17 8583 9 0 0

Hi, i m getting the below error while i am not getting the ldp session established for the particular device to their peers..


Jan 31 2013 20:29:29-05:13 BAP1 %%01LDP/4/SSNHOLDTMREXP(l)[22]:Sessions were deleted because the session hold timer expired and the notification of the expiry was sent to the peer 3.3.3.3.


Could you help me out

  • x
  • convention:

StarOfWest
Created Jan 31, 2013 15:27:35 Helpful(0) Helpful(0)

is in eNSP?
  • x
  • convention:

anand981
Created Jan 31, 2013 15:43:25 Helpful(0) Helpful(0)

No, its in real network, which we are testing to bring in production
  • x
  • convention:

StarOfWest
Created Feb 1, 2013 09:06:49 Helpful(0) Helpful(0)

1. check physical interfaces - should be up

2. check if  undo mpls, undo mpls ldp, or undo mpls ldp remote peer commands are running under interface/system view

3. check the routing table/connectivity

4. check the timers, maybe use default values

5. check the version of the switch if support mpls or not

  • x
  • convention:

anand981
Created Feb 1, 2013 11:18:42 Helpful(0) Helpful(0)

Hi,

I checked all the mentioned parameters and could not find any discrepancy,

attached the topology and configurations, please suggest

( interface specification is as per the sw1-4" diagram)

This article contains more resources

You need to log in to download or view. No account?Register

x
  • x
  • convention:

StarOfWest
Created Feb 1, 2013 13:14:06 Helpful(0) Helpful(0)

enable isis on loopbacks

 

interface LoopBack0
 ip address 1.1.1.1 255.255.255.255
 isis enable 1

 

  • x
  • convention:

anand981
Created Feb 5, 2013 09:45:42 Helpful(0) Helpful(0)

yes, even after enabling; i am not able to find isis route build up which leads to ldp peer formation,



[sw1]display ip routing-table

Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 7        Routes : 7

Destination/Mask    Proto   Pre  Cost      Flags NextHop         Interface

        1.1.1.1/32  Direct  0    0           D   127.0.0.1       LoopBack0
      127.0.0.0/8   Direct  0    0           D   127.0.0.1       InLoopBack0
      127.0.0.1/32  Direct  0    0           D   127.0.0.1       InLoopBack0
   192.168.34.0/30  Direct  0    0           D   192.168.34.1    Vlanif10
   192.168.34.1/32  Direct  0    0           D   127.0.0.1       Vlanif10
   192.168.34.4/30  Direct  0    0           D   192.168.34.5    Vlanif11
   192.168.34.5/32  Direct  0    0           D   127.0.0.1       Vlanif11

  • x
  • convention:

StarOfWest
Created Feb 6, 2013 10:44:07 Helpful(0) Helpful(0)

hi please check isis configuration, looks like there are no isis routes in routing table - no connectivity

I've configured in eNSP exactly your scenario, like in word file, whitout  isis ldp-sync and ldp sessions established.

 

 

  • x
  • convention:

anand981
Created Feb 6, 2013 11:41:30 Helpful(0) Helpful(0)

Yeah, thats fine..its working


want to clarify a thing , is there a way that we hard code the os of 5700 in ensp& make it work for all the supported cmd's in

for !Software Version V200R002C00

i.e by modifying the flash.dat file in C:\Program Files\eNSP\simserver\Devices\LSW\s5700


Thanks
  • x
  • convention:

StarOfWest
Created Feb 6, 2013 11:45:17 Helpful(0) Helpful(0)

Maybe eNSP developers can answer to your last question; but you should open a new thread for eNSP :)

I'm glad we clarified with LDP.

  • x
  • convention:

Reply

Reply
You need to log in to reply to the post Login | Register

Notice Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " Privacy."
If the attachment button is not available, update the Adobe Flash Player to the latest version!
Login and enjoy all the member benefits

Login and enjoy all the member benefits

Login