Got it
Huawei Enterprise Support Community
Community Forums Access Network
5680T-HG8010-After succes...

5680T-HG8010-After successful registration

Created: Aug 9, 2021 20:45:18Latest reply: Aug 10, 2021 00:38:16 216 2 13 0 0
  HiCoins as reward： 0 (problem unresolved)
View the author 1#

5680T-HG8010-After successful registration-can obtain DHCP-cannot PPPOE dial-up?

vlan 200 smart

port vlan 200 0/19 0

interface giu 0/19

native-vlan 0 vlan 200

ont add 0 70 sn-auth 48575443E0171382 omci ont-lineprofile-id 0 ont-srvprofi-id 0

quit

service-port vlan 200 gpon 0/2/0 ont 70 eth 1 multi-service user-vlan untagged


Very simple registration command. It was also registered in other OLTs in the past.

This is a new OLT, at the beginning, I found that port 19 was not working, so I switched to 0/20 0 and tried it, and found that PPPOE can dial.

I thought it was a problem with the upstream board, and after replacing one, it still looked like this. Change to 0/20 0 again to register and find that PPPOE is not working anymore.

But DHCP is straightforward. I would like to ask if it is an optical cat problem or an OLT. The model of the light cat is a stand-up cat of HG8010.

The VLAN200 of the switch has PPPOE and DHCP services.

Thanks


Like (13) Dislike (0) Favorite(0) Share Report
Previous: Transfer file between remote PC and HG8245Q2
Next: Router B818-263 - Only one ring to pick up a connected phone on RJ11 connector
Featured Answers

Recommended answer

(1) (0)
Chenxintao
Admin Created Aug 10, 2021 00:38:16

Hello, friend!


Based on the problem description, you can run the following command to configure the configuration:


interface giu 0/19

native-vlan 0 vlan 200


In the preceding configuration, the native VLAN of the upstream port of the OLT is set to 200, which means that the OLT removes the VLAN tag from the packets sent to the upper-layer device and sends the packets to the upper-layer device without the VLAN tag. Can the upper-layer network process the packets normally? You do not need to set the native VLAN to 200.


1. Delete the native VLAN configuration and try again.


2. If the problem persists, perform PPPoE dialup simulation according to the following links: (In the product documentation, choose Commonly Used Methods of Fault Locating and Troubleshooting > Service Simulation Test.) Check whether the channel between the OLT and the upper-layer switch is normal.


Access Network Products Troubleshooting Guide


Thanks!


View more
  • x
  • convention：
All Answers
(0) (0)
2#
user_3729046
user_3729046 Admin Created Aug 9, 2021 20:47:03

Hello User. we are reviewing your question and we will answer you shortly. Thanks.
View more
  • x
  • convention：
(1) (0)
3#
Chenxintao
Chenxintao Admin Created Aug 10, 2021 00:38:16

Hello, friend!


Based on the problem description, you can run the following command to configure the configuration:


interface giu 0/19

native-vlan 0 vlan 200


In the preceding configuration, the native VLAN of the upstream port of the OLT is set to 200, which means that the OLT removes the VLAN tag from the packets sent to the upper-layer device and sends the packets to the upper-layer device without the VLAN tag. Can the upper-layer network process the packets normally? You do not need to set the native VLAN to 200.


1. Delete the native VLAN configuration and try again.


2. If the problem persists, perform PPPoE dialup simulation according to the following links: (In the product documentation, choose Commonly Used Methods of Fault Locating and Troubleshooting > Service Simulation Test.) Check whether the channel between the OLT and the upper-layer switch is normal.


Access Network Products Troubleshooting Guide


Thanks!


View more
  • x
  • convention：
Back to list

Comment

Advanced
B Color Image Link Quote Code Smilies
You need to log in to comment to the post Login | Register
Comment

Notice: To protect the legitimate rights and interests of you, the community, and third parties, do not release content that may bring legal risks to all parties, including but are not limited to the following:
  • Politically sensitive content
  • Content concerning pornography, gambling, and drug abuse
  • Content that may disclose or infringe upon others ' commercial secrets, intellectual properties, including trade marks, copyrights, and patents, and personal privacy
Do not share your account and password with others. All operations performed using your account will be regarded as your own actions and all consequences arising therefrom will be borne by you. For details, see " User Agreement."

My Followers

Login and enjoy all the member benefits

Login
Huawei Website Support About Huawei Privacy User Agreement Terms of Use Cookies Cookie Settings
Huawei Enterprise Huawei Carrier Forum Training & Certification

Contact Us: e_online@huawei.com Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

APP

Block
Are you sure to block this user?
Users on your blacklist cannot comment on your post,cannot mention you, cannot send you private messages.
Reminder
Please bind your phone number to obtain invitation bonus.