/31 Subnet Mask on Huawei Router

Hello User. we are reviewing your question and we will answer you shortly. Thanks.

Ok dear i am anxiously waiting for it. Thanks

[~R1]disp version
Huawei Versatile Routing Platform Software
VRP (R) software, Version 8.180 (NE40E V800R011C00SPC607B607)
Copyright (C) 2012-2018 Huawei Technologies Co., Ltd.
HUAWEI NE40E uptime is 0 day, 0 hour, 8 minutes
SVRP Platform Version 1.0
[~R1]disp cur int Vlanif 10
#
interface Vlanif10
ip address 10.0.0.0 255.255.255.254
#
return
[~R1]ping 10.0.0.1
PING 10.0.0.1: 56 data bytes, press CTRL_C to break
Reply from 10.0.0.1: bytes=56 Sequence=1 ttl=255 time=7 ms
Reply from 10.0.0.1: bytes=56 Sequence=2 ttl=255 time=4 ms
Reply from 10.0.0.1: bytes=56 Sequence=3 ttl=255 time=7 ms
Reply from 10.0.0.1: bytes=56 Sequence=4 ttl=255 time=5 ms
Reply from 10.0.0.1: bytes=56 Sequence=5 ttl=255 time=10 ms

--- 10.0.0.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 4/6/10 ms

[~R1]

Did you commit configuration before ping?

Hi Abdul_Qadir,
A 31-bit mask can be assigned to the NE40E. If the address is a 31-bit mask, only one host is available on the network segment.
If the local IP address is pinged, it is normal. The ping failure is not caused by the ENSP fault.

Dear local end will be pingable but need to check for far end. I have checcked in eNSP far end is not pingable

GOOD