Hey guys, the following is the 3.0 EBS registration guide, hope it it helpful for you!
1. Obtaining the IMEI of a terminal
（1）Method 1 On the dialer, enter *#*#386#*#* and select EM350-related options.
（2）Method 2 After the battery cover is removed, the IMEI can be obtained from the factory label.
2. Log in to the OMS 3.0 through the Web UI (note: IE browser).ebs:https://x.x.x.x:8443/ebs
3. Idle Terminal management
(1).From the navigation menu, choose Idle Terminal. The Idle Terminal interface is displayed.
(2)Click New. The Idle Terminal Add interface is displayed.
4. Adding a PTT User Template(terminal/handset user)
（1）From the navigation menu, choose Template Management. The Template Management interface is displayed.
（2）Click New. The New Template interface is displayed.
（3）Select PTT User. The PTT user template parameters are displayed.
（4）Set user template parameters according to Table 1.
（5）Add IMSIs of idle terminals on the PTT user
（6）The user short number, user name, and password. You can also customize the value.
5. Adding an IP User Template（Dispatcher，Fixed Camera）
（1）From the navigation menu, choose Template Management. The Template Management interface is displayed.
（2）Click New. The New Template interface is displayed.
（3）Select IP User. The IP user template parameters are displayed.
（4）Set parameters
1）Dispatcher
2）Fixed Camera
3）PSTN User
4）TETRA User
5）PLMN User
6）SDKGatewayUser
7）TAPPUser
8）UELOGINUSER
6. Adding a PS User Template（CPE-EG860/Ea660）
（1）From the navigation menu, choose Template Management. The Template Management interface is displayed.
（2）Click New. The New Template interface is displayed.
（3）Select PS User. The PS user template parameters are displayed.
（4）Set user template parameters
Thanks!
