2 Different WLAN with 2 VLAN ID

On the BSS interface e assigned PVID 100 to VCY service set and PVID 105 to VCN service set. On both BSS intefaces i inserted in the untagged field the respective VLAN (BSS interface 1 untagged 100 and BSS interface 2 untagged 105). Is that correct?

Ok, for those in the same situation.

Each BSS Interface must have the PVID value equal to the VLAN you want and on the untagged field (BSS interface) the desired VLAN must be added. Ex. BSS interface on VLAN100: PVID: 100, Untagged:1,100.

If using the DOT1X authentication, you must have a VLANIF capable of reaching the RADIUS Server. Ex: VLAN100 is a corporate network working with Radius authentication.Therefore, i must have a VLANIF with the VLAN ID of 100 and a compatible IP address for that network/sub network.

In the case someone is having troubles with RADIUS auth, you have to configure the AAA scheme and RADIUS scheme in order to fully configure the RADIUS Domain (last tab of the AAA part). After creating the domain, you must "force" it through the service set/ bss interface.

It hasn't been fully tested, but it is working for now.

Can anyone help?

what  is  AC/AP   version ? you can  refer to the support website and there is configuration guide step by step：http://support.huawei.com/enterprise/docinforeader.action?contentId=DOC1000060169&idPath=7919710|21782164|21782201|21782208|7974000

I dont have an AC. The AP (Huawei AP5030DN) is working in FAT mode. Those instructions you sent do not show that subject (Associate a VLAN with a SSID). Do you have any idea on how to set VCN and VCY to VLAN 105 and VLAN 100 respectively? Thanks in advance!