Hi everyone! Do you know what 10.0.0.2 usually does, please read the introduction below.
10.0.0.2 is an intranet IP address, which is usually allocated to mobile phones, desktops, laptops, TVs, smart speakers, and other devices. There is also an IP 10.0.0.1 in the intranet, which is usually used for external purposes. Gateway use, this device is generally a WIFI wireless router or a switch with a routing function.
It's the default login IP that is reserved for modems or wireless routers. By typing 10.0.0.2 in the address bar of your browser you will get access to the admin interface of your router. 10.0.0.2 is mostly used by brands like Zoom, Prolink, or Encore. It's not the only standard IP for routers. There are dozens of different IPs like 192.168.1.1, 192.168.0.1, or 192.168.2.1 that were used to access your DSL router, DSL wireless router, or wireless router control panel. Such a standard IP is also called default gateway IP.
What can 10.0.0.2 do?
The 10.0.0.2 IP address is the default gateway for most wireless routers or ADSL modems.
A router can use multiple IPs as login addresses, but 10.0.0.2 is one of the common ones. It should be noted that routers of different brands have different default IP access addresses, and generally allow users to modify the default address. Therefore, please refer to the manual for the specific access address. In addition, it should be added that the default port is generally 80, so the access address omits the port (the full address is http://10.0.0.2:80). If the port value is modified, it needs to be written completely, such as http ://10.0.0.2:8080.
In order to manage your router, please fill in 10.0.0.2 in the address bar of your browser. When you successfully access the router admin panel, you can adjust and set the following options: IP Qos, DNS, Proxy, LAN, WAN, Network Management, Security Options, WLAN Settings, PPPOE, MAC, WPS, DSL, and DHCP Client end.
How do I log into the 10.0.0.2 IP address?
The operation is as follows:
1. Manually enter http://10.0.0.2 in the address bar of the browser. If 10.0.0.2 is not the IP address of the router, please check the management address of your router in the manual or check the router address and default username and password through the back of the router
2. Enter your username and password to log in to your router, usually the default username and password are both admin.
3. If you have modified the user name and password and do not remember the user name and password, please reset the router according to how to reset the user name and password of the router.
How to reset the router password
Turn off the router. Use a pointed object (like a pin) to hold the reset button for 10 - 15 seconds, then turn the router on. Press and hold the reset button until the router is powered on for 10 - 15 seconds. Release the button to restart the router.
Can't log in to the router management interface?
1. Make sure that the router and the computer are properly connected and the LAN port of the router is on and the corresponding indicator light is on
2. Set the IP of the computer to obtain automatically
3. Check if the address you entered in the browser is the router management address
4. Check whether the router port has been modified: If the router has remote management enabled and the management port of the router has been modified, you need to log in with http://management IP:XX, where XX is the modified port number, such as http: //10.0.0.2:8080.
5. Check whether the browser is set to proxy mode. If the browser is set to the default automatic dialing or proxy server function, it will cause you to be unable to log in to the management interface.
6. The router has enabled the forced binding of IP and MAC addresses. If it is not set correctly, it will result in the inability to log in to the management interface. If you forget the router management IP or port, it is recommended to restore the router to factory settings
