PDU Notification: Request/Response/Reject

selim.hasan   钻石会员    发表于 2014-5-24 20:46:13   最新回复:2018-06-09 12:57:57

1. The GGSN receives the PDP PDU and prepares to initiate the Network-Requested PDP Context Activation procedure.
2. The GGSN sends a Routing Information for GPRS (IMSI) message to the HLR. The HLR returns a
Routing Information for GPRS
Ack (IMSI, SGSN Address) message to the GGSN.
3. The GGSN sends a PDU Notification Request (IMSI, PDP Type, PDP Address, APN) message to the SGSN. The SGSN returns a PDU Notification Response (Cause=Request Accepted) to the GGSN. If the PDP context activation proceeds after the PDU Notification Response, but the PDP context was not established, the SGSN sends a PDU Notification Reject Request message (Cause=Invalid message format) to the GGSN. After receiving this message, the GGSN discards the T-PDUs stored on it.

4. The SGSN instructs the MS to activate the PDP context.

ahleemon   白金会员    发表于 2014-5-30 01:08:58

Good document. thanks!
Armetta   钻石会员    发表于 2014-5-29 18:15:13

documentation very useful for my job

shain   金牌会员    发表于 2014-5-29 23:39:49

very useful document for my regular O& M activity. Thanks.
user_2837311   钻石会员    发表于 2018-6-9 12:57:57

useful document, thanks
Have a nice day
快速回复 返回顶部