Alarm Severity Change Procedure at Huawei MSS

Touhid Diamond Medal

(1)
7 years 10 months ago View: 2954 Reply: 11

1F
View The Author

Change the severity from Warning to Major for below 3 alarms.

1) ALM-2503 BSC Block Circuit

2) ALM-4506 BSC Block Circuit Statistics

3) ALM-2513 BSC Circuit Group Block

=======DT=======================================

SET ALMLVL: AID=2503, ALVL=MAJOR;
SET ALMLVL: AID=2513, ALVL=MAJOR;
SET ALMLVL: AID=4506, ALVL=MAJOR;
======Check List=========================================
LST ALMCFG: STARTAID=2503, ENDAID=2503;
LST ALMCFG: STARTAID=2513, ENDAID=2513;
LST ALMCFG: STARTAID=4506, ENDAID=4506;

===============Printout_Before=============================

ALARM 1           Event     Warning         Exchange 2503     Software
                Alarm name = BSC block circuit
         Alarm shield flag = Unshielded
         To alarm box flag = Not Report
         Modification flag = Unmodified

===============Printout_after======================
%LST ALMCFG: STARTAID=2503, ENDAID=2503;%%
RETCODE = 0 Operation succeeded

ALARM 1           Event     Major           Exchange 2503     Software
                Alarm name = BSC block circuit
         Alarm shield flag = Unshielded
         To alarm box flag = Not Report
         Modification flag = Modified
   Original alarm severity = Warning
Original alarm shield flag = Unshielded
Original to alarm box flag = Not Report