SCCP Load Sharing
|
SG7000 V100R001 and later versions provide this feature.
This section describes the SCCP load sharing function provided by the SG7000.
Benefits: The powerful SCCP load sharing function and flexible configuration of the function enable the SG7000 to provide various load sharing modes for customers. Thus, the load can be evenly shared among network nodes and the reliability of the network is ensured.
The SG7000 supports the following functions:
For non-sequential class-0 messages, the SCCP module of the SG7000 supports the flexible configuration of SLS values so that these messages can be sent to different signaling points. For sequential class-1 messages, the SG7000 classifies the messages into 128 scopes and share the load of these messages among 16 DSPs based on the following information:
TID: TID can be used for route selection and link set selection, which enables the load to be evenly shared among signaling points. Proportion: The load sharing can be implemented based on the proportion configured according to the capability of signaling points Enhancement & De
|
|
The powerful SCCP load sharing function and flexible configuration of the function enable the SG7000 to provide various load sharing modes for customers. Thus, the load can be evenly shared among network nodes and the reliability of the network is ensured. Great benefit. |

Favorite (0)