PuTTY Operations

Procedure

1. Double-click the shortcut icon http://localhost:7904/pages/CEC1230A/01/CEC1230A/01/resources/cnup/reference/general_opt/figure/fig_cn_46_19_00020901.png on the desktop or choose Start > Programs > HUAWEI Operation & Maintenance System > PuTTY to open the PuTTY Configuration window, as shown in Figure 1.
   Figure 1 PuTTY Configuration dialog box
   http://localhost:7904/pages/CEC1230A/01/CEC1230A/01/resources/cnup/reference/general_opt/figure/fig_cn_46_19_00020902.png
   
2. Configure the parameters of the PuTTY. Table 1 lists the parameters.
   http://localhost:7904/pages/CEC1230A/01/CEC1230A/01/resources/public_sys-resources/icon-note.gif NOTE:

   Configure Host Name (or IP address), and then Saved Sessions according to the descriptions of Table 1. Thus, you can log in to a board by double-clicking the IP address specified by Saved Sessions through PuTTY.

   Table 1 Parameter description

   Parameter	Description
   Host Name (or IP address)	This parameter specifies the IP address (such as 167.1.1.123) of the target board to be logged in.
   Port	This parameter specifies the port number. The default value is 22.
   Connection type	This parameter specifies the connection type. The default value is SSH.
   Saved Sessions	This parameter specifies the IP address of the target board. You can enter the IP address of the board in the text box under Saved Sessions, and then click Save to save the IP address of the target board.
   Close window on exit	By default, Only on clean exit is selected.

3. Check whether to configure the element management system as the proxy to connect the target board.
   • Yes: Go to 4.
   • No: Go to 6.
4. Choose the Connection > Proxy node in the navigation tree as shown in Figure 1.
5. Configure the parameters of the OSS proxy, as listed in Table 2. After the parameter configuration, the window as shown in Figure 2 is displayed.