RRU Fixation at tower

RRU Fixation at tower

The RRU will be installed at the approved height of site design. It may be installed by installing additional pole on tower angle or behind the GSM antenna. Feeder length from GSM antenna to RRU will be as close as possible. And the length of RRU pole (if used) will be 1.5 m. The grounding of RRU will be 35 rm Al or 16 rm Cu. 

In case of RRU installation at more than 35 m of tower, RRU will be installed inside or outside of tower angle. It will be subjected to the field condition whether there is free space available on tower or not. Adequate mounting kit will have to be used during RRU

installation. 

If proposed tower leg have any  MW (Microwave) antenna, than RRU will be below height between the MW antenna.