GPRS: The Packet Switched Data

General Packet Radio Service, provides the basic GSM upgrade technology used to provide packet data at up to 172 kbps.

The key element of GPRS technology is that it uses packet switched data rather than circuit switched data, and this technique makes much more efficient use of the available capacity. This is because most data transfer occurs in what is often termed a "bursty" fashion. The transfer occurs in short peaks, followed by breaks when there is little or no activity.

Using a traditional approach a circuit is switched permanently to a particular user. This is known as a circuit switched mode. In view of the bursty nature of data transfer it means that there are periods when it will not be carrying data.

To improve the situation the overall capacity can be shared between several users. To achieve this, the data is split into packets and tags inserted into the packet to provide the destination address. Packets from several sources can then be transmitted over the link. As it is unlikely that the data burst for different users will occur all at the same time, by sharing the overall resource in this fashion, the channel, or combined channels can be used far more efficiently. This approach is known as packet switching, and it is at the core of many cellular data systems, and in this case GPRS.

GPRS technology brings a number of benefits for users and network operators alike. It was widely deployed to provide a realistic data capability via cellular telecommunications technology.