Caller Number Analysis (CNACLR TABLE)

This is a configuration command and is used to add a caller number analysis data record to the
configuration database.

When you set Caller number analysis flag
to Yes by using ADD CNACLD , the caller number
analysis data set by using ADD CNACLR is valid.

When you set Processing type to Trigger DP1 of N-CSI or
Trigger DP2 of N-CSI , the caller number analysis data set by
using ADD
CNACLR is valid,
irrespective of the value of Caller number analysis
flag set by using ADD
CNACLD .

When a call is initiated by a caller of the local office or the incoming
trunk, you can add the caller
number analysis data by using ADD CNACLR to perform special processing for
the call.

The special processings are as follows:

• 
  

  Converting the caller number

  
  
• 
  

  Converting the called number

  
  
• 
  

  Processing failure

  
  
• 
  

  Triggering NCSI_DP1(only when the incoming trunk subscriber originates a
  call)

  
  
• 
  

  Triggering NCSI_DP2

  
  
• 
  

  Modifying the call source attribute of the caller