Service-Identifier

abrahim
abrahim  Diamond  (1)
7 years 10 months ago  View: 1627  Reply: 1
1F


Item

Description

AVP Name

Service-Identifier (The name in message tracing results is service-identifier.)

AVP Example

http://localhost:7904/pages/CEC1230A/01/CEC1230A/01/resources/upcc/maintenance/signaling/figure/fig_cn_90_35_000126_01.png

AVP Code

439 (Vendor-id = 0)

Data Type

Unsigned32

Syntax

The Service Identifier AVP is contained in the Charging-Rule-Definition AVP and X-HW-Service-Usage AVP.

  • The syntax of the Charging-Rule-Definition AVP is as follows:

    Charging-Rule-Definition ::= < AVP Header: 1003 >

    { Charging-Rule-Name }

    [ Service-Identifier ]

    [ Rating-Group ]

    ...

  • The syntax of the X-HW-Service-Usage AVP is as follows:

    X-HW-Service-Usage ::= < AVP Header: 2007 >

    [ Rating-Group ]

    [ Service-Identifier ]

    [ CC-Input-Octets ]

    ...

Definition

The Service-Identifier AVP indicates the identifier of a service.

Application Scenario

The Service-Identifier AVP is applicable to the proprietary fair usage policy (FUP) service provided by Huawei.

The Service Identifier AVP and the Rating-Group AVP jointly identify a service. The Service Identifier AVP value is determined by carriers.

The service identifier can be configured in the ChargingAction action on the UPCC. It is delivered by the Charging-Rule-Definition AVP included in a CCA message to notify the PCEF of the service identifier applied to the rule.

The PCEF includes the X-HW-Service-Usage AVP in a CCR message and sends the CCR message to the UPCC to report the data usage. In this case, other sub-AVPs such as the Service-Identifier AVP are also included in the CCR message. The UPCC identifies the quota and deducts the data usage based on the Monitoring-Key and Service-Identifier AVPs.

NOTE:
  • In V300R002C02, the Rating-Group AVP and Service-Identifier AVP are associated with sub-AVPs in the Charging-Rule-Definition AVP to correlate the data usage with the service flow.
  • In V300R002C05, the Rating-Group AVP maps the Monitoring-Key AVP defined in the Policy and Charging Control (PCC). In addition, the Service-Identifier AVP is not processed.

Related Configuration

  • To configure the FUP with which the data usage monitoring mode complies, run Modify Peer PCEF Ability Item for PCRF (MOD PCEFABIITEM) in the MML Command - UPCC window.

  • If the Service-Identifier AVP is included in the Charging-Rule-Definition AVP, configure this AVP by setting Service Identifier under ChargingAction when configuring Action Group.

  • If the Service-Identifier AVP is included in the X-HW-Service-Usage AVP, configure this AVP by setting Service Identifier when configure Quota.
Armetta
Armetta  Diamond 
7 years 10 months ago
2F
great presentation