Introduction to a Power Cable

DC-Input Power Cable

DC-input voltage ranges from -38 V DC to -72 V DC.

DC-input power cables contain a -48 V power cable that connects the NEG terminal of a power module and a ground cable that connects the RTN terminal of a power module.

The DC-input power cable transfers the -48 V DC power from DC distribution equipment to the terminal block of a DC power module to supply power for the system.

One end of the DC-input power cable of the Eudemon 8160E is the JG double-hole bare crimp terminal that connects a power distribution cabinet. The other end is the OT bare crimp terminal that connects a power module.

Figure 1 and Figure 2 show the appearances of the terminals of the DC-input power cable of the Eudemon 8160E.

Figure 1:  Appearance of the terminal of the OT bare crimp terminal

Figure 2:  Appearance of the JG double-hole bare crimp terminal

One end of the DC-input power cable of the Eudemon 8080E is the JG double-hole bare crimp terminal that connects a power module.

AC-Input Power Cable

AC-input voltage ranges from 85 V AC to 264 V AC, 50/60 Hz.

Both ends of an AC-input power cable of the Eudemon 8080E/8160E are OT bare crimp terminals.