Fault Handling: Insufficient resources in PS
|
Activate PDP Context Reject: Insufficient resources Operation Procedure:
1.The most possible cause is that the EPU failure or resource congestion results in the failure to apply for resources during PDP context activation. In this case, you can check the status of the EPU and check whether resource congestion alarms are reported by the EPU. 2.You can also check whether the number of activated PDP contexts reaches the maximum limit specified in the license and check whether resource congestion alarms are reported by the SPP. 3.If CPU congestion or PDP congestion occurs on the GBP, the alarm subsystem displays the corresponding alarms. 4.If the function of denying service access is enabled, users with certain charging attributes are denied the access to data services when the cache is full. In this case, you can disable the function specified by SET CHGCHAR in the charging attribute table. 5. If the SPP or GBP is locked, manually unlock it by running UBL BRD. |
Favorite (0)
ReplyHot Group
Fixed Network Info Community
Members:9595 Posts:9360
Members:9595 Posts:9360
Wireless Network Info Community
Members:2501 Posts:11275
Members:2501 Posts:11275
Support HedEx User Group
Members:14004 Posts:4898
Members:14004 Posts:4898
Core Network Info Community
Members:1125 Posts:14720
Members:1125 Posts:14720
Network OSS Club
Members:4641 Posts:1596
Members:4641 Posts:1596