Fault Handling: PS Attach Failure Caused by the Enabling of the RAU Authenticati
|
PS Attach Failure Caused by the Enabling of the RAU Authentication Function l Fault Handling procedure: p Open the subscriber signaling tracking, check the cause of attach rejected: p In this case, the SGSN sends Attach Reject message, but the HLR does not return Insert Subscriber Data message. Attach Reject is ported with "Protocol error, unspecified (111)" cause value. |
Favorite (0)
ReplyHot Group
Fixed Network Info Community
Members:9595 Posts:9360
Members:9595 Posts:9360
Wireless Network Info Community
Members:2501 Posts:11275
Members:2501 Posts:11275
Support HedEx User Group
Members:14004 Posts:4898
Members:14004 Posts:4898
Core Network Info Community
Members:1125 Posts:14720
Members:1125 Posts:14720
Network OSS Club
Members:4641 Posts:1596
Members:4641 Posts:1596