Alarm type, Severity and Category

pintu.sadhu
pintu.sadhu  Platinum  (1)
7 years 10 months ago  View: 1149  Reply: 2
1F
Alarm Type
    1. Fault alarm:Fault alarm indicates a state of a device. One value is configured for the alarm state and when the         alarm is removed, the value of the state is also changed. Usually the severity of fault alarms are higher than event          alarms, and fault alarms and their clearance alarms are corresponding with each other.

    2. Event alarm: It only indicates the system is in alarm state at a certain time. There is no cleared alarm for event         alarms.

Alarm Severity 
    1. Critical alarm, this box is filled with red color
    2. Major alarm, this box is filled with orange color
    3. Minor alarm, this box is filled with yellow color
    4. Warning alarm, this box is filled with blue color


FIGURE: Number of alarms of each severity

Alarm Category 
    1. Power alarm 
    2. Environment alarm 
    3. Signaling alarm 
    4. Trunk alarm 
    5. Hardware alarm 
    6. Software alarm 
    7. Running alarm
    8. Communication alarm 
    9. Quality of Service (QoS) alarm 
    10. Error alarm 

mmkabir
mmkabir  Silver 
7 years 10 months ago
2F
good for NOC team....
nsiddique
nsiddique  Silver 
7 years 10 months ago
3F
nicely described