Activation of IPPM

mahmud_h Diamond Medal

(1)
7 years 10 months ago View: 1356 Reply: 3

1F
View The Author

Use this command to activate IPPM detection.

Command: ACT IPPM

?The IP path to be activated with the IPPM detection function must be configured, and all the IPPMs corresponding to the IP path are activated.

?The IP path to be activated with the IPPM must be configured on Iub or Abis interface.

?If several IPPATH have same local IP and peer IP, but have different VLANID, some IPPM on NodeB or BTS may fail to be activated.

Use this command to query IPPM State. This command is applicable to the FG2a, GOUa, FG2c and GOUc boards.

Command: DSP IPPM

Armetta Diamond
7 years 10 months ago

2F
View The Author

This document is very well done

yaziz Diamond
7 years 10 months ago

3F
View The Author

good

Group	Post
User	Document

Hot Group