How do I solve the problem where no tunnel can be created using the U2000?
Favorite (0)
| Check that the SNMP parameter settings on the U2000 match those on the NEs. Specifically, choose Administration > NE Communicate Parameter > NE Access Protocol Parameters from the main menu (traditional style); alternatively, double-click Fix-Network NE Configuration in Application Center and choose Administration > NE Communicate Parameter > NE Access Protocol Parameters from the main menu (application style). Set SNMP parameters on the U2000 to be the same as those on associated NEs. Then check whether the number of tunnels configured on the source and sink NEs has reached the maximum value. If yes, use NEs with a larger capacity to replace these NEs. |
ReplyHot Group
Fixed Network Info Community
Members:9595 Posts:9360
Members:9595 Posts:9360
Wireless Network Info Community
Members:2501 Posts:11275
Members:2501 Posts:11275
Support HedEx User Group
Members:14004 Posts:4898
Members:14004 Posts:4898
Core Network Info Community
Members:1125 Posts:14720
Members:1125 Posts:14720
Network OSS Club
Members:4641 Posts:1596
Members:4641 Posts:1596