RSL_CUR indicates the current radio received signal level. When the radio received signal level is very low (below RSL_MIN) or very high(beyond RSL_MAX), bit errors occur and even services are interrupted. If the radio received signal level exceeds RSL_MAX, then RADIO_RSL_HIGH will report.  If the radio received signal level is below RSL_MIN, then or RADIO_RSL_LOW alarm will report.

Where,

RSL_MAX indicates the maximum radio received signal level.

RSL_MIN indicates the minimum radio received signal level.

RSL_AVG indicates the average radio received signal level.

Good, thanks a lot.

thanks for sharing this