I will share my experience configuring tdm services using MDU MA5612 as the access device for 2G BTS and the MA5603T as the OLT to change the native tdm over GPON to PWE3 in the upstream layer.

The MA5603T it?s equiped with the following boards: SPUB, CSPA, GPBD, SCUN, GICK, CITD. MA5612 it?s equiped with E81A board.

Topology it?s like this:

You can find the configuration files examples in the attachment

Hope can be usefull for somebody!

Good post

Good sharing. Good configuring example.

Very helpful share. You are a real expert

I have a lot to learn from you.

Its useful.

Good post.

Its useful.

Thanks for share it Felipe!

You are welcome! Two important thing I forget to mention. The minimun BW recomended for each E1 in the dba profile should be no less than 5440 Kbps, so if you need to deploy more than one E1 your BW will increase in nx5440 Kbps where n is the amount of E1s. That?s because the PW header consumes a lot of BW and also GEM protocol header. Also the OLT should work in min-loop delay