In the non-turn-key project, both the customer and the project supervisor  are required to be present at the unpacking site. If eitheris absent at the unpacking site, the party who unpacks shall take the responsibility forany errors occurring to the articles.

In the turn-key project, it is the project supervisor and the order management

engineer who unpack, check and accept, hand over the articles, and make a

confirmation with signatures.

Before unpacking, both parties should check if the packing cases are damaged. If so,

stop unpacking and contact the order management engineer at the local office of

Huawei, waiting for the handling. Meanwhile, check if the quantity of cases on the site

agrees with the packing list, if the place of delivery agrees with the actual installation

place, and if the articles have been inversed during the transportation. If there is any

disagreement, the project supervisor should feed back the Article Problem Feedback

Form confirmed by the customer with a signature to the order management engineer

at the local office within 3 days.

After all the above inspections are ok, unpack the cases to check and accept the

articles.

There are two kinds of packages: wooden crate and cartons. The unpacking tools

should be used accordingly.

After all the above inspections are ok, unpack the cases to check and accept the articles. A document should also be available for OBI.

Form confirmed by the customer with a signature to the order management engineer at the local office within 3 days. 

The time duration should be maintain by the mutual understanding by the customer & Vendor.

Remarkable topics for obi.

This document is very well done

Good post

useful document, thanks