I am reading the model MA5690 series, one of the function is " remote software commissioning".

In our hand now is MA5694. Can you share the procedure to use it ?

MA5694 supports onsite software commissioning-free for ethernet upstream transmission in an NAC solution. 

Network deployment flow with the NMS:
1. A commissioning engineer plans data, including creating the network topology (the connection mode of MA5600T ports) and planning ONU management parameters (such as management VLAN, IP address, gateway address, and SNMP parameter profile).
2. A commissioning engineer fills in the planned data to the data planning table and imports the table to the NMS.
3. The NMS automatically issues the channel management parameters of lower-layer devices to the MA5600T.
4. A hardware installation engineer obtains the ONU, transports them from the warehouse to each site, installs hardware, seats wires, and powers on the devices.
5. After being powered on, the ONU verifies that its database is empty. Then the device sends an NAC automatic discovery request. Upon receiving the request, the MA5600T issues NAC parameters to the ONU.
6. The MA5600T issues channel management parameters to the ONU. After the ONU obtains these parameters, you can log in to the device.
7. A commissioning engineer issues service configurations to the ONU using the pre-deployment function on the NMS or using the CLI.

 

 

Maybe it can help you.