Problem:

A Trunk Group overflow

Cause:

1.MS location update to new BSC during paging. 2.P1100BIT1 = 0

Solution:

1. SET P150BIT12 = 0. this will increase the call set time, so don’t modify this parameter. solution:overflow is less than 0.1%. No need to deal with this issue.

thanks for sharing

good solution

nice doc

This document is very well done

Thanks, better to keep the setup time low. nice info.

"overflow is less than 0.1%. No need to deal with this issue." can be given in NOTE section

Very informative and useful..

good findings.

great solution