Dynamic Channel Conversion Control Parameters
|
PDCH reforming This parameter controls the behavior of CS Repacking together with parameter “Level of Preempting Dynamic Channel. This parameter specifies the levels of dynamic channels preempted by CS services and PS services. Only full-rate TCHs are the dynamic channels that can be preempted. –Preempt all dynamic TCHFs: It indicates that the CS services can preempt all the dynamic channels. –No preempt of CCHs: It indicates that the CS services can preempt all the dynamic channels except for the control channels. –No preempt of service TCHF: It indicates that the CS services cannot preempt the dynamic channels that carry services.
PDCH reforming This parameter controls the behavior of CS Repacking together with parameter “Level of Preempting Dynamic Channel. Maximum PDCH numbers of carrier This parameter specifies the maximum number of PDCHs allocated to a TRX. Maximum Ratio Threshold of PDCHs in a Cell The PDCH ratio is equal to PDCHs / (TCHs + static PDCHs). This parameter determines the proportion of PDCHs to the total number of TCHs + PDCHs.
|

Favorite (0)