Problem Description

View P2P statistics. In multiple IP groups at a zone level, the curve of only one IP group fluctuates a lot and the P2P restriction effect is not desirable.
Null

Handling Process

1、View the real-time interface. Interference packets are sent out from the zone.

2、View the P2P menu of this IP group. If no display is found, log in to the SPS of the IP group. Use the showsas command to check whether the SPS learns the P2P SAS. If the value is 0.0.0.0, it indicates that the SPS does not learn the SAS.

3、Run the showspsconf command to check whether SRS is learned. If the result is positive, see if it can be pinged.

4、Check Zone and Equipment Management. Check whether the IP group name in P2P is selected in SAS Equipment Details.

Root Cause

N/A

Solution

In Zone and Equipment Management, in SAS Equipment Details, select P2P. Then, click Modify. Select the check box next to the IP group.

Suggestions and Summary

When adding a new IP group, engineers often forget to select the check box. This should draw your attention.

Thanks for the upload it was useful information.

very useful information

keep it up man