[Multimode Base Station Commissioning Guide]
|
1.Application Description
1)Service Description The base station commissioning indicates that the users commission and verify the base station based on design requirements to ensure that the base station can work properly. Before commissioning a base station, ensure that the following prerequisites are met: 1.The hardware has been installed. For details about the hardware installation, see Base Station Installation Guides. 2.The base station to be deployed has been configured. For details about the data configuration, see 3900 Series Base Station Initial Configuration Guide or 3900 & 5900 Series Base Station Initial Configuration Guide. 3.The target software package and commissioning license have been obtained. Based on the onsite commissioning scenarios and available tools, select the corresponding chapters in 3900 Series Base Station Commissioning Guide or 3900 & 5900 Series Base Station Commissioning Guide to complete the commissioning. 2)Documentation Description
1.The general commissioning procedure is the same for different modes of base stations. Therefore, the structure of the commissioning guide is scenario-oriented but not the network mode-oriented. 2.Refer to appropriate instructions based on the application scenario of the base station.
3. The following methods can be used for base station commissioning in different scenarios:
4. The commissioning procedures for different base stations all include the following aspects:
2.Highlights Simulated application scenarios facilitate information searching.
3.Reference Documents
|



Favorite (0)